View N121I3-L01_4185231.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 2 / 30 version 2.0 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 5.5 edid data structure 5.6 edid signal specification 6. interface timing ------------------------------------------------------- 20 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 22 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 25 8.1 handling precautions 8.2 storage precautions 8.3 operation precautions 9. packing ------------------------------------------------------- 26 9.1 carton 9.2 pallet 10. definition of labels ------------------------------------------------------- 28 10.1 cmo module label 10.2 carton label www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 3 / 30 version 2.0 revision history version date page (new) section description ver 2.0 nov. 28,?05 all all approval specification first issued. www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 4 / 30 version 2.0 1 general description 1.1 overview n121i3 -l01 is a 12.1? tft liquid crystal display module with single ccfl backlight unit and 20 pins lvds interface. this module supports 1280 x 800 wide-xga mode and can display 262,144 colors. the optimum viewing angle is at 6 o?clock direction. th e inverter module for backlight is not built in. 1.2 features - thin and light weight - wxga (1280 x 800 pixels) resolution - 3.3v lvds (low voltage differential signaling) interface with 1 pixel/clock - meet rohs requirement 1.3 application - tft lcd notebook 1.4 general specificati0ns item specification unit note active area 261.12 (h) x 163.2 (v) (12.1? diagonal) mm bezel opening area 263.12 (h) x 165.2 (v) mm (1) driver element a-si tft active matrix - - pixel number 1280 x r.g.b. x 800 pixel - pixel pitch 0.204 (h) x 0.204 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment hard c oating (3h), glare type - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 275.3 275.8 276.3 mm vertical(v) 177.4 178 178.6 mm module size depth(d) - 4.9 5.2 mm (1) weight - 260 275 g - note (1) please refer to the attached drawings for more information of front and back outline dimensions. www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 5 / 30 version 2.0 2 absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 200/2 g/ms (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) (a) 90 %rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel display surface area should be 0 oc min. and 60 oc max. note (3) 1 time for x, y, z. for condition (200g / 2ms) is half sine wave,. note (4) 10 ~ 500 hz, 30 min/cycle,1cycles for each x, y, z axis. note (5) at testing vibration and shock, the fixt ure in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 6 / 30 version 2.0 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +4.0 v logic input voltage v in -0.3 vcc+0.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = 6.0 ma lamp current i l 3.0 6.5 ma rms lamp frequency f l 45 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to section 3.2 for further information www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 7 / 30 version 2.0 3 electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - ripple voltage v rp - 100 mv - rush current i rush - 1.2 1.5 a (2) white - 290 - ma (3)a power supply current black lcc - 350 - ma (3)b ?h? level v il - - +100 mv - logical input voltage ?l? level v ih -100 - - mv - terminating resistor r t - 100 - ohm - power per ebl wg p ebl - 2.873 - w (4) note (1) the module should be always operated within above ranges. note (2) measurement conditions: note (3) the specified power supply current is under the conditions at vcc = 3. 3 v, ta = 25 2 oc, dc current and f v = 60 hz, whereas a power dissipation check pattern below is displayed. vcc rising time is 470us 470us +3.3v gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 8 / 30 version 2.0 note (4) the specified power are the sum of lcd p anel electronics input power and the inverter input power. test conditions are as follows. (a) vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, (b) the pattern used is a black and white 32 x 36 checkerboard, slide #10 0 from the vesa file ?flat panel display monitor setup patterns?, fpdmsu.ppt. (c) luminance: 60 nits. (d) the inverter used is provided from o2mi cro(www.o2micro.com). cmo doesn?t provide the inverter in this product. active area a. white pattern active area b. black pattern www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 9 / 30 version 2.0 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 540 600 660 v rms i l = 6.0 ma 2.0 (1),(2) lamp current i l 3.0 6.0 6.5 ma rms (1),(3) - - 1,220 (25 deg c) v rms (4) lamp turn on voltage v s - - 1,380 (0 deg c) v rms (4) operating frequency f l 45 - 80 khz (5) lamp life time l bl 10,000 - - hrs (7) power consumption p l - 3.6 - w (4), i l = 6.0 ma note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) for burst mode inverter design note (3) for continuous mode inverter design note (4) the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (5) the lamp frequency may generate interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (6) p l = i l ?? v l note (7) the lifetime of lamp is defined as the time wh en it continues to operate under the conditions at ta = 25 ? 2 o c and i l = 6.0 ma rms until one of the following events occurs: (a) when the brightness becomes ?? 50% of its original value. (b) when the effective ignition length becomes ?? 80% of its original value. (effective ignition length is defined as an area that the brightness is less than 70% compared to the center point.) note (8) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid generating too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter lcd module 1 inverter a current meter hv (pink) lv (white) 2 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 10 / 30 version 2.0 which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within ?? 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 11 / 30 version 2.0 4 block diagram 4.1 tft lcd module 4.2 backlight unit 1 hv (pink) 2 lv ( white ) v edid data edid vcc gnd v l clk(+/-) rxin2(+/-) rxin1(+/-) rxin0(+/-) tft lcd panel (1280x3x800) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector ( df19kr-20p-1h or equivalent ) lamp connector (jst-bhsr-02vs-1) edid eeprom clk edid www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 12 / 30 version 2.0 5 input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vss ground - 2 vdd power supply +3.3 v - 3 vdd power supply +3.3 v - 4 v edid ddc +3.3 v 5 test panel self test 6 clk edid ddc clock 7 data edid ddc data 8 rxin0- lvds differential data input negative 9 rxin0+ lvds differential data input positive r0~r5,g0- 10 vss ground 11 rxin1- lvds differenti al data input negative 12 rxin1+ lvds differential data input positive g1~g5,b0,b1 13 vss ground 14 rxin2- lvds differential data input negative 15 rxin2+ lvds differential data input positive - b2~b5,hsync,vsync,de 16 vss ground 17 clk- lvds clock data input negative 18 clk+ lvds clock data input positive lvds level 19 vss ground - - 20 vss ground - - note (1) connector part no.: df19kr-20p-1h or equivalent note (2) user?s connector part no: df19g-20s-1c or equivalent 5.2 backlight unit pin symbol description color 1 hv high voltage pink 2 lv ground white note (1) connector part no.: jst-bhsr-02vs-1 or equivalent note (2) user?s connector part no.: jst-sm02b-bhss-1-tb or equivalent 5.3 timing diagram of lvds input signal t/7 in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+ www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 13 / 30 version 2.0 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input the brighter the color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 14 / 30 version 2.0 5.5 edid data structure the edid (extended display identification data) data formats are to support displays as defined in the vesa plug & display and fpdi standards. byte # (decimal) byte # (hex) field name and comments value (hex) value (binary) 0 0 header 00 00000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 8 8 eisa id manufacturer name (?cmo?) 0d 00001101 9 9 eisa id manufacturer name (compressed ascii) af 10101111 10 0a id product code 10 00010000 11 0b id product code 12 00010010 12 0c id s/n (fixed ?0?) 00 00000000 13 0d id s/n (fixed ?0?) 00 00000000 14 0e id s/n (fixed ?0?) 00 00000000 15 0f id s/n (fixed ?0?) 00 00000000 16 10 week of manufacture (fixed week code) 01 00000001 17 11 year of manufacture (fixed year code) 10 00010000 18 12 edid structure version # (?1?) 01 00000001 19 13 edid revision # (?3?) 03 00000011 20 14 video i/p definition (?digital?) 80 10000000 21 15 max h image size (?26cm?) 1a 00011010 22 16 max v image size (?16cm?) 10 00010000 23 17 display gamma (gamma = ?2.2?) 78 01111000 24 18 feature support (?active off, rgb color?) 0a 00001010 25 19 red/green (rx1, rx0, ry1, ry 0, gx1, gx0, gy1, gy0) fc 11111100 26 1a blue/white (bx1, bx0, by1, by 0, wx1, wx0, wy1, wy0) c5 11000101 27 1b red-x (rx = ?0.573?) 92 10010010 28 1c red-y (ry = ?0.339?) 56 01010110 29 1d green-x (gx = ?0.327?) 53 01010011 30 1e green-y (gy = ?0.566?) 91 10010001 31 1f blue-x (bx = ?0.151?) 26 00100110 32 20 blue-y (by = ?0.125?) 20 00100000 33 21 white-x (wx = ?0.313?) 50 01010000 34 22 white-y (wy = ?0.329?) 54 01010100 35 23 established timings 1 00 00000000 36 24 established timings 2 08 00001000 37 25 manufacturer?s reserved timings 00 00000000 38 26 standard timing id # 1 01 00000001 39 27 standard timing id # 1 01 00000001 40 28 standard timing id # 2 01 00000001 41 29 standard timing id # 2 01 00000001 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 15 / 30 version 2.0 42 2a standard timing id # 3 01 00000001 43 2b standard timing id # 3 01 00000001 44 2c standard timing id # 4 01 00000001 45 2d standard timing id # 4 01 00000001 46 2e standard timing id # 5 01 00000001 47 2f standard timing id # 5 01 00000001 48 30 standard timing id # 6 01 00000001 49 31 standard timing id # 6 01 00000001 50 32 standard timing id # 7 01 00000001 51 33 standard timing id # 7 01 00000001 52 34 standard timing id # 8 01 00000001 53 35 standard timing id # 8 01 00000001 54 36 detailed timing description # 1 pixel clock (?71mhz?, according to vesa cvt rev1.1) bc 10111100 55 37 # 1 pixel clock (hex lsb first) 1b 00011011 56 38 # 1 h active (?1280?) 00 00000000 57 39 # 1 h blank (?160?) a0 10100000 58 3a # 1 h active : h blank (?1280 : 160?) 50 01010000 59 3b # 1 v active (?800?) 20 00100000 60 3c # 1 v blank (?23?) 17 00010111 61 3d # 1 v active : v blank (?800 :23?) 30 00110000 62 3e # 1 h sync offset (?48?) 30 00110000 63 3f # 1 h sync pulse width ("32?) 20 00100000 64 40 # 1 v sync offset : v sync pulse width (?3 : 6?) 36 00110110 65 41 # 1 h sync offset : h sync pulse width : v sync offset : v sync width (?48: 32 : 3 : 6?) 00 00000000 66 42 # 1 h image size (?261 mm?) 05 00000101 67 43 # 1 v image size (?163 mm?) a3 10100011 68 44 # 1 h image size : v image size (?261 : 163?) 10 00010000 69 45 # 1 h boarder (?0?) 00 00000000 70 46 # 1 v boarder (?0?) 00 00000000 71 47 # 1 non-interlaced, normal, no stereo, separate sync, h/v pol negatives, de only note: lsb is set to ?1? if panel is de-timing only. h/v can be ignored. 18 00011000 72 48 detailed timing description # 2 00 00000000 73 49 # 2 flag 00 00000000 74 4a # 2 reserved 00 00000000 75 4b # 2 fe (hex) defines ascii string (model name ?N121I3-L01?, ascii) fe 11111110 76 4c # 2 flag 00 00000000 77 4d # 2 1st character of name (?n?) 4e 01001110 78 4e # 2 2nd character of name (?1?) 31 00110001 79 4f # 2 3rd character of name (?2?) 32 00110010 80 50 # 2 4th character of name (?1?) 31 00110001 81 51 # 2 5th character of name (?i?) 49 01001001 82 52 # 2 6th character of name (?3?) 33 00110011 83 53 # 2 7th character of name (?-?) 2d 00101101 84 54 # 2 8th character of name (?l?) 4c 01001100 85 55 # 2 9th character of name (?0?) 30 00110000 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 16 / 30 version 2.0 86 56 # 2 10th character of name (?1?) 31 00110001 87 57 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 88 58 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 89 59 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 90 5a detailed timing description # 3 00 00000000 91 5b # 3 flag 00 00000000 92 5c # 3 reserved 00 00000000 93 5d # 3 fe (hex) defines ascii string (vendor ?cmo?, ascii) fe 11111110 94 5e # 3 flag 00 00000000 95 5f # 3 1st character of string (?c?) 43 01000011 96 60 # 3 2nd character of string (?m?) 4d 01001101 97 61 # 3 3rd character of string (?o?) 4f 01001111 98 62 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 99 63 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 100 64 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 101 65 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 102 66 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 103 67 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 104 68 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 105 69 (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 106 6a (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 107 6b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 108 6c detailed timing description # 4 00 00000000 109 6d # 4 flag 00 00000000 110 6e # 4 reserved 00 00000000 111 6f # 4 fe (hex) defines ascii string (model name?N121I3-L01?, ascii) fe 11111110 112 70 # 4 flag 00 00000000 113 71 # 4 1st character of name (?n?) 4e 01001110 114 72 # 4 2nd character of name (?1?) 31 00110001 115 73 # 4 3rd character of name (?2?) 32 00110010 116 74 # 4 4th character of name (?1?) 31 00110001 117 75 # 4 5th character of name (?i?) 49 01001001 118 76 # 4 6th character of name (?3?) 33 00110011 119 77 # 4 7th character of name (?-?) 2d 00101101 120 78 # 4 8th character of name (?l?) 4c 01001100 121 79 # 4 9th character of name (?0?) 30 00110000 122 7a # 4 10th character of name (?1?) 31 00110001 123 7b ( if <13 char, then terminate with ascii code 0ah, set remainin g 0a 00001010 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 17 / 30 version 2.0 char = 20h) 124 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 125 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 126 7e extension flag 00 00000000 127 7f checksum cd 11001101 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 18 / 30 version 2.0 5.6 edid siginal specification (1) edid power parameter symbol test condition min. typ. max. unit power supply voltage vcc ? 1.8 ? 5.5 v (2) dc characteristics parameter symbol test condition min typ max unit supply current vcc=5.0v icc read at 100khz ? 0.4 1.0 ma supply current vcc=5.0v icc write at 100khz ? 2.0 3.0 ma standby current isb vin=vcc or vss ? 1.6 4.0 a input leakage current ili vin=vcc or vss ? 0.1 10 a onput leakage current ilo v out=vcc or vss ? 0.1 10 a input low level vil ? -1.0 ? vcc x 0.3 v input high level vih ? vcc x 0.7 ? vcc+0.5 v output low level vcc=3.0v vol1 iol=3ma ? ? 0.4 v output low level vcc=1.8v vol2 iol=1.5ma ? ? 0.5 v www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 19 / 30 version 2.0 (3) ac characteristics (vcc=1.8~5.5v standard operation mode) parameter symbol min max unit clock frequency, scl f scl ? 100 khz clock pulse width low t low 4.7 ? g s clock pulse width high t high 4.0 ? g s noise suppression time t i ? 100 ns clock low to data out valid t aa 0.1 4.5 g s time the bus must be free before a new transmission can start t buf 4.7 ? g s start hold time t hd.sta 4.7 ? g s start set-up time t su.sta 4.7 ? g s data in hold time t hd.dat 0 ? g s data in set-up time t su.dat 200 ? ns inputs rise time t r ? 1.0 g s inputs fall time t f ? 300 ns stop set-up time t su.sto 4.7 ? g s data out hold time t dh 100 ? ns write cycle time t wr ? 10 ms www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 20 / 30 version 2.0 6 interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc - 71 73 mhz - vertical total time tv 802 823 840 th - vertical addressing ti me tvd 800 800 800 th - horizontal total time th 1380 1440 1450 tc - de horizontal addressing time thd 1280 1280 1280 tc - input signal timing diagram 6.2 power on/off sequence t h t c dclk t hd t vd t v de de data - power supply for lcd, vcc - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off 10% t7 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 21 / 30 version 2.0 timing specifications: 0.5ms issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 22 / 30 version 2.0 7 optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 6.0 ma inverter driving frequency f l 61 khz inverter sumida-h05-4915 the measurement methods of opt ical characteristics are shown in section 7.2. the following items should be measured under the test conditions describ ed in section 7.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note contrast ratio cr 300 500 - - (2), (5) t r - 5 10 ms response time t f - 11 16 ms (3) luminance of white l ave 170 200 - cd/m 2 (4), (5) white variation w - - 1.25 - (5), (6) rx 0.572 - red ry 0.336 - gx 0.328 - green gy 0.570 - bx 0.154 - blue by 0.139 - wx 0.313 - color chromaticity white wy x =0 , y =0 viewing normal angle typ.- 0.03 0.329 typ.+ 0.03 - (1), (5) x + 40 45 - horizontal x - 40 45 - y + 15 20 - viewing angle vertical y - cr 10 40 45 - deg. (1), (5) www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 23 / 30 version 2.0 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x- x+ y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray level 63 gray level 0 gray level 63 time t f optical response t r 66.67m 66.67ms www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 24 / 30 version 2.0 note (4) definition of average luminance of white (l ave ): measure the luminance of gray level 63 at 5 points l ave = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] ca210 cs-1000t fi e l d o f vi e w= 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) d w active area vertical line horizontal line : test point x=1 to 5 5 1 2 3 4 d/4 d/2 3d/4 w/4 w/2 3w/ x www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 25 / 30 version 2.0 8 precautions 8.1 handling precautions (1) the module should be assembled into the system fi rmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes , it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. 8.2 storage precautions (1) high temperature or humidity may reduce the perfo rmance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or co ntacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient te mperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up. (3) the startup voltage of backlight is approximatel y 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 26 / 30 version 2.0 9 packing 9.1 carton www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 27 / 30 version 2.0 9.2 pallet www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 28 / 30 version 2.0 10 definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. made in taiwan e207943 n141x5 - l03 rev.xx x x x x x x x y m d l n n n n c p 1 3 5 4 4 8 - 0 1 01a (a) model name: n121i3 - l01 (b) revision: rev. xx, for example: c1, c2 ?etc. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change (c) serial no.: manufacturing sequence of product product line year, month, date cmo internal use revision cmo internal use serial no. n121i3 - l01 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: nov. 28, 2005 model no.: n121i3 -l01 approval 29 / 30 version 2.0 10.2 carton label www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of N121I3-L01

	To Download N121I3-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .